News
Factory «NEC Ukrenergo» Crimean EPS, Ukraine
Rebuilding of the compensator ПС 330 kV «Simferopol», Crimean EPS is being carried out.
ТPS «Pha Lai», Vietnam.
The work on survey and testing of the turbine K-100-90-7 had been finished. Spadeworks before withdrawal of the turbine for repair are carring out.
Heat Electropower Station of mine Barentsburg, archipelago Shpitsbergen, Norway.
Overhaul and current repair of steam turbines ПР-2,5-35 st. №2 and st. №1 are finished. Works on replacement of the plant pipelines have been started.
TPS «Muzaffargarh», Pakistan.
After the performance of work on replacement of coils КПП ВД second degree boiler ТГМЕ-206 station №2 hydra testing and balancing and commissioning were performed – the boiler had been put into operation. Works on replacement of coils КПП ВД second degree boiler ТГМЕ-206 station №3 have been started.
«Nikolaev aluminous factory» LTD, Ukraine
Overhaul repair of the boiler БКЗ-75/39 ГМА st. №10 and accessory equipment is still in progress.
Georgian International Energy Corporation, Georgia.
Preparation to the capital repair of the turbogenerator ТВВ-165-2 block №4 JSC «Tbilisi TPP» has been started.
«Saqnakhshiri Ltd» (GIG Group), Georgia.
Installation of the cable facility in Tkibuli is still in progress, the erecting works and connection of the equipment OPY-35 kV, KPY-6 kV, 0,4 kV are implemented.
ТPS «UONG BI», Socialist Republic Vietnam.
The condition and operating mode of the equipment unit capacity 315 MW with the further research report compilation, with the actions issue on leading operating mode of equipment to the project indicators are being carried out together with the DONORGRESS.
OJSC ”UkrHydroEnergo”, Dniprodzerzhynsk HPS, Ukraine.
Under the fulfillment of reconstruction of the hydrogenerator СВ1500/110-116 st. №5, works on laying the stator windings of the hydrogenerator are being held.
Construction of 3 units with a capacity 660 МW ТPS «Bar»,India.
Preparation for delivery of the first 100t of inserts to the customer is being held. Packing and marking of finished goods are implemented.

